IBERTEST Cement testing and similar

Fully automatic, digital compression testing machine series for cement and related materials, as per EN 196-1, ASTM C 109 and C 349.
Accuracy class 1, as per ISO 7500
Measurement scales: 1/1 and 1/5
Microprocessor-controlled, MDA programmable electronic module with 2 digital readout channels.
Hydraulic unit with automatic, closed-loop proportional valve (MDA-type) or servovalve (MDA/SV) control.

Technical specifications

CIB...-SW y CIB...-W series

Automatic, computerized compression testing machine series for cement and related materials, as per EN 196-1, ASTM C 109 and C 349.
Accuracy class 1, as per ISO 7500 (SWC versions) or class 0.5 (W version).
Measurement scales: 1/1 and 1/5 (SW series) or 1/1 and 1/10 (W series).
Servocontrolled hydraulic unit with automatic, closed-loop control by MOOG servovalve.
Fully automatic, computer-controlled by PC delivered as series equipment: iPentium IV-type microprocessor with flat colour screen, fitted with 32-bit WINTEST® software for MS Windows™ series.

Technical specifications

AUTOTEST-...series

Combined installations featuring two testing frames (for bending and compression) based on a CIB-SW or CIB-W machine, completed by a low-capacity bending test machine, all sharing the hydraulic unit and computer control system.
The testing frame to work with is selected by means of switching electrovalves, from the PC keyboard or mouse, which is also able to issue combined bending and compression test series reports.
Both testing frames are built inside an ergonomic, metallic bench, which houses the hydraulic unit and the electrical board. On top of it, there is the control and readout computerized system and associated electronics.

Technical specifications

FIB-...series

Servohydraulic computerized, fully automatic testing machines for bending tests on specimens (of cement, mortar, gypsum, ceramic, etc), tiles, slabs, (of cement, concrete, ceramics, etc.) and other building materials.
Load capacities range from 5 to 200 kN, to match with almost any application.
Force measurement system: load cell.
Testing frames sizes are tailored to the user specific application in terms of vertical and horizontal clearances, selection of bending tables, load and supporting rollers. Analogue features to those of compression testing machines (MDA, MDA/SV, /SW and /W versions).

Technical specifications

SIB-...W series

Fully automatic, electromechanical machines with one central high precision screw driver for the crosshead height setting and two guide columns. Suitable for multiple purposes: designed as Marshall and CBR soil testing machines, versatile and fitted for many other test types, by means of specific, standard-prescribed devices.
Load capacities range from 5 to 200 kN, to fulfil the whole needs range of both bending and compression tests on frequent building materials such as cement, gypsum, ceramics, concrete, etc.
Accuracy class 1, as per ISO 7500.
Computer-controlled (W suffix) by PC delivered as series equipment: iPentium IV-type microprocessor with flat colour screen, fitted with 32-bit WINTEST® software for MS Windows™ series, and up to 16 measurement channels.
Multiple, exchangeable load cells featuring software-detection, overload protection, automatic zero and scale setting. Together with the specific testing devices make this a universal use machine.

Technical specifications

STIB-...W series

STIB series are a variant of SIB series, which can additionally perform tensile tests, thanks to their reinforced height-adjustable crossbeam, linear bearings, a Cardan drive and the corresponding tensile heads, exchangeable with any of the other testing devices (compression plates, bending devices, etc).
Multiple, exchangeable load cells featuring software-detection, overload protection, automatic zero and scale setting, covering the whole load capacity range. Together with the specific testing devices make this a universal use machine.

Technical specifications

CIB-... series Technical Specifications Summary

Series	CIB-MDA	CIB-MDA/SV	CIB-SW	CIB-W
Capacity range available	50, 100, 200, 250, 300, 400 kN
Class (ISO 7500)	1	1	1	05
Force measurement system	Load cell
Scales	1/1 y 1/5			1/1 y 1/10
Measurement range	2% through 100% of maximum capacity			1% to 100% of max. capacity
Bench type	Two independent, one for the testing frame, the other for the hydraulic unit and control system.			Only one (supporting testing frame, hydraulic unit and control system).
Automatic, closed-loop controlled hydraulic unit	High-pressure leak-tight, anti-pollutant low-noise housing, fitted with filtering and safety systems, alarms and so on.
Regulation system	Proportional valve	Moog servovalve
Control system	Microprocessor-controlled digital module, programmable, fitted with functional membrane touch, emergency stop, Centronics and RS232 data output interfaces		Computer-based, featuring a PC with iPentiumIV microprocessor and 17” TFT flat colour screen (as series equipment of W version), 32-bit WINTEST® software for MS Windows™ series and associated electronics.
Number of measurement channels	2	2	Up to 16	Up to 16
Computer control and programming with 32-bit WINTEST® software for MS Windows™ series	As an optionn	As an option	Series equipment	Series equipment
Testing frame	Upper crosshead fixed upon two columns (height-adjustable in W-version machines), and steel baseplate, which supports the jacket-piston set. Fixed upper plate, in order to avoid disturbing effects by double ball seating supports in tests with standard-prescribed compression.
Compression plates	Hardened and ground, w/ diameter: 180 mm
Distance between compression plates	Fixed: 250 mm			Adjustable up to 290 mm
Piston stroke	60 mm
Air-oil heat exchanger	As an option			Included
Anti-projections safety system of Makrolon (composite w/ high resistance against impact)	Foldaway feature			Frontal opening
Safety lock	None			Electric
Collection tray for specimens smashes	Under the lower compression plate, with smashes collection takeaway trolley -as an option			Under the lower compression plate with falling slide and hole in the bench for the smashes collection into an internal trolley
Smashes-carrying trolley	As an option			Si, situada en el interior del bastidoInside the bench, removable from the front side

AUTOTEST-... series Technical Specifications Summary

Specifications	AUTOTEST-SWC	AUTOTEST-W
Compression load capacity. Bending load capacity.	100, 200, 250, 400 kN. 5, 10, 20 kN. 2 testing frames with independent load pistons, sharing the upper crosshead, which hangs over in the bending test frame. Low load testing frame with compression plates (bending device not included). EN 196-1, ASTM C 109, C 349, C 348	100, 200, 250 y 400 kN 5, 10, 20 kN. 2 fully independent testing frames with Makrolon partition plate. Low load testing frame with built-in bending device aimed at standard prismatic specimens sized 40 x 40,1 x 160 mm, with distance between rollers of 100 mm (EN) or 119 mm (ASTM).
Class as per ISO 7500	1	0,5
Force measurement system	Load cell in both testing frames	Load cell in both testing frames
Work bench	Of welded steel tubes covered with removable panels, with epoxy resin finishing coat Collection tray for specimens smashes under the lower compression plate, with collection takeaway trolley -as an option	Of welded steel tubes covered with removable panels, with epoxy resin finishing coat, with stainless steel countertop. Collection tray for specimens smashes under the lower compression plate, inside the bench for the smashes collection into an internal trolley, which is removable from the front
Control system	Fully automatic, computerized by means of PC, with iPentiumIV microprocessor and 17” TFT flat colour screen. 32-bit WINTEST® software for MS Windows™ series (compression and bending versions) and multichannel (up to 16 measurement channels) electronic blaster.	Fully automatic, computerized by means of PC, with iPentiumIV microprocessor and 17” TFT flat colour screen. 32-bit WINTEST® software for MS Windows™ series (compression and bending versions) and multichannel (up to 16 measurement channels) electronic blaster.

FIB-... series Technical Specifications Summary

Version	Features and specifications
FIB...MDA y FIB...MDA/SV	Class 1, as per ISO 7500. Hydraulic unit with automatic, closed-loop control by proportional valve (MDA-type) or MOOG servovalve (MDA/SV). Control system: microprocessor-controlled, MDA programmable electronic module with 2 digital readout channels, functional membrane touch, emergency stop, Centronics and RS232 data output interfaces for peripheral connection (printers, control and data acquisition computerized systems and so on).
FIB...SW y FIB...W	Class 1 (SW) or 0.5 (W) as per ISO 7500. Servocontrolled hydraulic unit with MOOG servovalve. Control system: Fully automatic, computer-controlled by PC delivered as series equipment: iPentium IV-type microprocessor and flat colour screen, fitted with 32-bit WINTEST® software for MS Windows™ series.