IBERTEST Concrete testing and similar

IB37-010E- Concrete Mixer For Laboratory Purposes

100 litre-concrete mixer aimed at preparing very homogeneous mixtures of concrete and of related materials.
Mixing pan with dumping disassembling feature for cleaning purposes. Transport trolley.
Output: 3 m³/hr
Power supply: 3 x 220/380 V, 50 Hz
Power: 1.5 HP
Series variants: 50 and 150 litres

IB37-020E - Abrams Slump Cone Test Set

To measure consistency in fresh concrete containing aggregates smaller than 50 mm in size, as per UNE 83 313, ASTM C 143, BS 1881, NF P 18-305, and equivalent.
The complete set consists of slump cone (in zinc-coated steel), tamping rod (in galvanized steel), readout rule (in stainless steel) to measure the slump –height at which the concrete settles, and baseplate (in zinc-coated steel).
Optional accessory: filling hopper, in Aluminium

IB37-025E - Vebe Time Test Set (Consistency Tester)

The time elapsed to the concrete settling or dispersing after the cone removal, under vibration, is an indication of its workability. It is a mechanized variation of the Slump Cone test, onto a small vibrating table with fixed frequency (3,000 rpm). A disk in plastic -in contact with the fresh concrete upper face, shows that the time is over.
The test set also includes a specimen vessel, a graduated rod and a baseplate.
Power supply: 220 V, 50 Hz
Net weight: 90 kg.

IB37-030E - Cylindrical Mould

Intended for producing cylinder specimens as per UNE 83 301, ASTM C 39, C 192, BS 1881 and equivalent; that is: exact size 15 cm diameter and 30 cm height.
Consisting of two semi-cylinder pieces hinged together and a bottom with a flange for hermetic closing.
Made of quenched steel
Net weight (approx.): 10 kg
Accessories:
Filling hopper
Tampering rod
Series variants: in non-deformable plastic

IB37-030E01- Cubic Mould

Intended for producing cubic specimens with side length either 10, 15 or 20 cm.
Three mould, side length 10, 15 or 20 cm.
Made of steel, with outside coating and fully disassembling feature.
Series variants:
In non-deformable plastic.

IB37-030E02 - Prismatic Mould

For producing the following prismatic specimens sizes:
10 x 10 x 40 cm
15 x 15 x 60 cm
20 x 20 x 80 cm
Made of steel, with outside coating and fully disassembling feature.

Digital Thermometer

Different temperature ranges and types (benchtop and portable).

IB37-055E - Vibrating Table

To vibrate and settle mass concrete in cylinder, cubic and prismatic moulds, in order to get a more homogeneous and stiff mixture.
Durable, reduced-noise device, delivering 3,000 rpm vibration frequency.
Size: 600 x 400 mm
Net weight (approx.): 50 kg
Power supply: 220 V, 50 Hz

IB37-070 - Sulphur Capping Set

To cap load-bearing surfaces of cylinder concrete test specimens, as per UNE 83 303:84, ASTM C 617, C 31, C 192, AASHTO T-23, T-126, BS 1881 and equivalent.
Consisting of a capping frame in coated steel and a removable base disk in chrome-coated steel, 60 HRC in hardness.
Standard series for capping cylinder specimens of diameter 15 cm x height 30 cm.
Net weight (approx.): 10 kg
Series variants available for the following cylinder specimen sizes:
diameter 10 cm x height 20 cm
diameter 7.5 cm x height 15 cm

IB37-075E - Sulphuric Mortar Melting Device

To keep hot but not burn sulphuric mortar for capping concrete specimens, as per UNE 83 303:84, ASTM C 617, C 31, C 192, AASHTO T-23, T-126, BS 1881 and equivalent.
Very accurate, thermostat-controlled device, with oil thermal insulation, double-wall stainless steel inside plate and sheathed, oil immersion heaters.
Capacity: 10 litres
Power: 4,500 W
Mains supply: 220V, 50 Hz.
Net weight: 12 kg.

IB-37-080E - Manual Air Entrainment Meter

For determining the air entrainment in fresh concrete, as described in UNE 7141, DIN 1048, ASTM C 231, BS 1881 and equivalent.
Made of cast aluminium, and powered by a manual pump, instead of electricity. Pressure chamber and sample container are fastened to each other with a mechanical seal. The device supply also includes a built-in manometer with direct readout in percentage of air content, spherical keys and quick-clamping fasteners between top and bottom.
Capacity: 8 litres
Net weight (approx.): 10 kg
Size: 290 x 560 mm
Variant: electric-powered air entrainment meter.

IB37-091E - Light Core Drilling Machine

Intended for extracting test cores from concrete, asphalt and soils, as per UNE 83 302:84, ASTM C 42 and equivalent.
Suitable for vertical drilling, with core advance mechanism controlled by hand wheel.
Speed: 450 and 900 rpm.
Drilling capacity: 150 mm diameter.
Power: 2.3 kW
Accessories:
• Diamond drill bits to extract hydraulic concrete cores sized 75, 100 and 150 mm diameter.
• Adapters for these core bits.
• Diamond drill bits to extract bituminous concrete cores sized 75, 100 and 150 mm diameter.
• Strap wrench
Variants: featuring higher speed, different working positions and fitted with internal combustion engine.

IB37-100E - Disk Cutting Machine

Suitable for disks sized up to 450 mm diameter, which allows cutting specimens with diameter up to 150 mm with only one way through, hence ensuring a precise cut.
Foldaway and standing onto a chart fitted with wheels. Open casing for easy airing; closed cooling circuit with water pump and waste receiving tray.
Tilting spindle head with screw hand wheel to graduate the cut depth; sliding carriage made of cast aluminium and trapezoidal belt transmission.
Power: 7.5 CV
Mains supply: 2 x 220/380 V, 50/60 Hz
Net weight (approx.): 125 kg
Variants: disc cutting machine for disks sized 350 mm in diameter and 5.5 CV power.

IB37-130E - N-type Schmidt Rebound Hammer (Sclerometer or Impact Tester)

Concrete Strength Impact Test according to DIN 4240 and DIN 1048 standards is based in a non-destructive percussion applied near the structure surface. The concrete hardness is an indication of the strength of its mortar.
Percussion energy: 0.225 kgm or 2.20 J.
Hammer pin diameter: 15 mm.

Series variants:

NR-type, same as N, with paper log.
L-type, with 0.05 kgm or 0.735 J and 15 mm hammer diameter
LR-type, same as L, with paper log.
P-type, with 0.09 kgm or 0.88 J and 20 mm hammer diameter
PT-type, with 0.09 kgm or 0.88 J and 40 mm hammer diameter.

IB37-140E - Schmidt Hammer Self-Calibration Testing Anvil

Accessory which lets quickly calibrating of N, L and NR-types Schmidt impact testers, preventing measure errors.
Made of treated steel.
Variants: calibration testing anvil for P and PT-types Schmidt impact testers

IB37-146E - Microcovermeter

This non-destructive test device detects the steel reinforcement elements in concrete structures and delivers their position, alignment, size and diameter, which are found by hand-moving an electromagnetic probe upon the structure surface.
It also lets finding tips, hooks and mesh reinforcing bar stirrups, and is compliant with the standard BS 1881, part 204.

Performance and features:

Depth: 220 to 360 mm (depending on the bars diameter).
Exploration probe.
Microprocessor with LCD and sound alert.
Spacer
Spare batteries
Size: 180 x 100 x 45 mm
Net weight (approx.): 800 gr.

IB37-160E - Setting Time By Penetration Resistance (Acme Penetrometer)

For determining the setting start and end of concrete mixtures, as per ASTM C 403.
It consists of a load-applying resort, calibrated from 1 up to 100 kgf, with the corresponding indication by a scale needle; and 6 exchangeable plunger probes, with respective sections (in mm²) 650, 325, 160, 65, 32 and 16.
Net weight (approx.): 5 kg

IB37-170E - Indirect Tensile Test Device (Brazilian Test)

For testing cylindrical concrete specimens, both moulded and drilled, sized 15 cm in diameter and 30 cm in height, as described in the standards UNE 83 306:86, ASTM C 496, BS 1881, NF P 18-408 and equivalent.
This device consists of a lower support plate, made of steel, with ground and blued, steel-made bearing surface, which haves notches at both ends to center the support plywood sheets, 3 mm width and 25 mm height.
Intended to be put between the compression plates of a test machine with sensitive measuring devices and strong enough to perform a load speed of 0.03 ± 0.01 MPa/s.
Accessories:
Set of 100 plywood sheets, 3 mm in width and 25 mm in large.

IB37-180E - 4 Point Bending Device

For bending tests of concrete specimens as per UNE 83 305:86 and ASTM C 78.
Roller diameter: 20 mm
Roller length: 160 mm
Distance between rollers with two setting positions in order to test both 100 x 100 x 400 and 150 x 150 x 600 mm prismatic concrete specimens.
Single block main element in blued steel, with machined supporting surfaces and springs to return the centre load applying edge to its initial position without affecting the load; quenched ground steel rollers, coated in hard chrome (hardness approx. 60 HRC).
Intended to be put between the compression plates of a test machine.

IB37-188E - Poisson Coefficient Measuring Device with 10 mm-LVDT transducers

Device consisting of three parallel-supported aluminium-made rings, featuring LVDT-transducers capable of measuring axial and transverse deformation of the surrounded specimen.
Deformation output signals are collected by a digital measurement device fitted with double indication, with max. readout approx. 9.999 and 0.001 mm respectively.
Net weight (approx): 10 kg
Variants: Poisson Coefficient measuring device with comparator gauge.
Yield point measuring device, either with comparator gauge or with LVDT transducer

IB37-191E - Concrete Specimens Accelerated Curing Tank

For wet curing, as per BS 1881, part 14.
Capacity: 8 cylinder specimens sized 15 cm diameter and 30 cm side length.
High precision, thermostatic-controlled between 35 and 55ºC with stability: ±2ºC.
Inner vessel made of stainless steel.
Heating power: 3 kW
Water circulation pump (approx.): 450 litre/hour
Fitted with lid, drain tap and temperature graphic log with 24-hour record, as prescribed in the norm.
Variants:
For other quantities of specimens

IB37-196E - Humidifier With Continuous Water Supply (Humidistat)

Fitted with 12.5 mm diameter and 585 mm long thermohygrometric probe.
Relative Humidity range measurement (in %RH): 5 to 90 ±2.5
Temperature range measurement (ºC): -30 to 130 ±0.2.

IB37-200E - Thermohydrograph With Temperature And Humidity Record

Hydrothermograph with a dual logger for both temperature and humidity, each in a different channel, on a paper strip.
The set includes 50 sheet record paper, throwaway fibre pen with ink fill, safety lock and user handbook.
Record time frame: weekly
Humidity record: 0 to 98%RH
Accuracy: ±0.5%
Temperature record: -20º to +40ºC.
Size: 310 x 160 x 270 mm.
Net weight (approx.): 3.5 Kg.
Accessories:
50-sheet pack of record paper
throwaway fibre pen with ink fill
Variant:
Daily record.

IB37-210E - Pull-Off Tester (Concrete Tensile Strenght and Coating Adhesion Bond Pull Tester)

Portable device which delivers concrete tensile and coating adhesion strength, as their testing takes place right upon the structure element in question.
An adhesion test disk in steel -sized 50 mm diameter, is stuck over the target test surface and tightened to the pull-off device by a built-in draw bolt. By means of the hand crank the disk is pulled off up to the separation.
The separation force (indicated in daN) is a measurement of the concrete tensile strength and of the adherence strength of many common coatings: synthetic, paintings on concrete, mortar, gypsum and bituminous, paintings and related on metallic materials, and so on.
The set includes an adhesion test disk and a fastening bolt.
Test capacity: 15 kN
Net weight (approx.): 5 kg.
Variants: 5, 25 and 50 kN test capacities.
Accessories:
1 set of 10 testing disks.
50 mm diameter bit.