Dynamic Testing Machines

IBERTEST UFIB series, servohydraulic testing machines have been designed to perform dynamic tests with tensile-compression load on metallic and non metallic materials. The following is just a summary of the UFIB series: in actual fact, their specifications are tailor-made, because each application requires a capacity, frequency, amplitude, load type, hydraulic system oil flow, servocylinder type and stroke, etc. different from another set of specifications. Do not hesitate to contact us for a case study on your needs. See also Custom-made Installations

 

 

UIB-.../W Series

• Capacities range from ±1kN (UFIB-1/W) up to ±1,000 kN (UFIB-1000W). • Accuracy class 0,5 or 1 as per ISO 7500. • Single-space type testing frame with 2 or 4 columns, depending on the capacity and performance. • Double acting symmetric, double rod servocylinder, fitted with an anti-twisting system. The servocylinder can be conventional, semi-hydrostatic or hydrostatic, depending on the application, vibrating frequency and amplitude range. • Manifold with a high performance servovalve and low and high pressure accumulators, located in the servo-cylinder. • Magnetostrictive transducer located inside the servo-cylinder. • Low-profile fatigue load cell • Fully computer-controlled, by PC delivered as series equipment. • WINTEST® software for MS Windows™ series. • Automatic calculation of results and statistics, plot of graphs, curve comparisons, etc. • Maximum frequency up to 50 Hz. • Fully servo-controlled in force or extension (switch-selected) with adjustable amplitude (either in kN or in mm) and optionally, in strain. • Wave-shapes offered: ramp, sinus, saw teeth and square waveform (others upon demand). • Latest generation applied electronics featuring FPGA technology. • Up to 16 measurement channels, extendable. • (no figura en versión en castellano) Maximum sampling frequency: up to 50 kHz. • Real sampling frequency (for each series also depending on the application): 1 to 5 kHz. • Hydraulic pump choice with performance according to the user needs.

SAE IBERTEST Pol. Industrial Gitesa I  C/Ramón y Cajal, 35. 28814  Daganzo (Madrid) - Spain. 

Phone: +34 91 8845430. Fax: +34 91 8845002 info@ibertest.es